QUICK ANSWER: GI welded wire mesh price in India depends on four things: wire diameter, opening size, zinc coating method and order quantity. Metfab quotes all four openly, the same day.
Trying to compare GI welded wire mesh price across three quotations and finding none of them match? You are in the right place. Suppliers sell mesh by weight, by area and by panel, often in the same conversation, which makes comparison almost impossible. At Metfab Wire Products, we break the number down so you can see exactly what you are paying for.
What Actually Drives GI Welded Wire Mesh Price
Four things move the figure, and wire diameter moves it most. A heavier wire puts more steel in every square metre, and since mesh is usually priced by weight, the rate climbs with it. Opening size works the other way, because a wider opening uses less wire for the same area. Then comes the coating: galvanized after welding costs more than galvanized before welding, and it should, since the zinc then covers the joints too. Finally, quantity matters, as a full production run always beats a cut piece. In fact, two quotations can look far apart simply because one is GBW and the other GAW.

Three quotes that do not match? Then let us break it down.
How to Compare Quotes Fairly
Before you compare a GI welded wire mesh price from two suppliers, get these five things in writing:
- Wire diameter in mm, not gauge alone
- Opening size and panel or roll dimensions
- Coating method, GBW or GAW, with coating weight
- Whether the rate is per kg, per square metre or per panel
- Edge finish and whether cutting is included
Once those five match, the comparison becomes honest. Until then you are comparing two different products that happen to share a name.

Need GBW and GAW compared side by side? Then ask us.
What Changes the Rate, at a Glance
| Factor | Effect on Price | Why |
|---|---|---|
| Heavier wire diameter | Increases | More steel per square metre |
| Larger opening | Decreases | Less wire for the same area |
| GAW instead of GBW | Increases | Joints are coated after welding |
| Higher quantity | Decreases | Full production run |
| Cut panels and finished edges | Increases | Extra fabrication |

Have your opening and wire ready? Then send your spec.
Why Buyers Choose Metfab on GI Welded Wire Mesh Price
We manufacture, so the rate you get is a factory rate rather than a margin stacked on a trader. As a trusted manufacturer, we quote the wire diameter, opening, coating method and basis of pricing on the same sheet, so nothing is hidden in a footnote. In addition, we will tell you when a lighter wire would do the job and save you money, because a repeat customer is worth more than one inflated order. Consequently, buyers who first came to us for a price comparison tend to stay for the next project.

Want the pricing basis in writing? Talk to us.
Get Your GI Welded Wire Mesh Price Across India
We work out of Jhajjar, Haryana, so we quote and dispatch pan-India. Send the opening, wire diameter, panel size and quantity, and you will have a clear rate the same day, with the coating method stated.
Besides the rate itself, we flag what the market is doing. Therefore if steel or zinc prices are moving, we tell you how long the quotation holds, instead of letting it lapse quietly.
Ultimately, the cheapest quotation is rarely the cheapest mesh. For instance, a GBW panel on a coastal site may need replacing in a year, while GAW keeps going for several. We put both options in front of you with the numbers attached.

Need a rate today? Place your enquiry.
Want a clear GI welded mesh rate today? Talk to our team.
Frequently Asked Questions
How is GI welded wire mesh priced in India?
Usually by weight, sometimes by square metre or per panel. Always confirm which basis a quotation uses before comparing.
Why do two quotes for the same mesh differ so much?
Most often because one is GBW and the other GAW, or the wire diameter differs by a fraction of a millimetre.
Does a bigger opening cost less?
Yes. A wider opening uses less wire per square metre, so the rate per unit area falls.
Do you quote for small quantities?
Yes, though the rate per unit is better on full production runs than on small cut pieces.
How long is a quotation valid?
We state the validity on the quotation, since steel and zinc prices move.
